Removal Procedure
- Remove the screws that retain the back
body opening applique to the body.
- Remove the nuts that retain the applique to the body.
- Remove the applique from the vehicle.
Installation Procedure
- Install the back body opening applique
to the vehicle.
Notice: Refer to Fastener Notice in the Preface section.
- Install the nut retaining the applique to the body.
Tighten
Tighten the nut to 6 N·m (53 lb in).
- Install the screw retaining the applique to the body.
Tighten
Tighten the screw to 3 N·m (27 lb in).