Tools Required

J 34940 Rivet Gun

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Using a 1/4 inch (6 mm) drill bit, remove the rivets from the heat shields, as necessary.



3. Remove the exhaust tailpipe heat shield from the vehicle.



4. Remove the exhaust tailpipe heat shield from the vehicle.



5. Remove the muffler heat shield.



6. Remove the muffler heat shield.



7. Remove the front exhaust pipe heat shield.



8. Remove the front exhaust pipe heat shield.

1. Install the front exhaust pipe heat shield on the vehicle.
2. Install the rivets on the heat shield using the J 34940 .



3. Install the front exhaust pipe heat shield on the vehicle.
4. Install the rivets on the heat shield using the J 34940 .



5. Install the muffler heat shield on the vehicle.
6. Install the rivets on the heat shield using the J 34940 .



7. Install the muffler heat shield on the vehicle.
8. Install the rivets on the heat shield using the J 34940 .



9. Install the exhaust tailpipe heat shield on the vehicle.
10. Install the rivets on the heat shield using the J 34940 .



11. Install the exhaust tailpipe heat shield on the vehicle.
12. Install the rivets on the heat shield using the J 34940 .
13. Lower the vehicle.