GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2000 🢒 Savana 🢒 Body and Accessories 🢒 Cruise Control 🢒 Cruise Control Module Replacement

Removal Procedure
  1. Raise and support the hood.
  2. Remove the air cleaner assembly from the vehicle. For the 4.3L engine, refer to Air Cleaner Assembly Replacement in Engine Controls. For the 5.0/5.7L engine, refer to Air Cleaner Assembly Replacement in Engine Controls. For the 6.5L diesel engine, refer to Air Cleaner Assembly Replacement in Engine Controls.
  3. Disconnect the electrical connector from the cruise control module.
  4. Disconnect the cruise control cable from the cruise control module. Refer Cruise Control Cable Replacement .

    5. Object Number: 332346 Size: SH
  5. Remove the nuts (2) that retain the cruise control module to the cruise control bracket.
  6. Remove the cruise control module (3) from the cruise control bracket (1).
  7. Remove the cruise control module (3) from the vehicle.

Installation Procedure

    Object Number: 332346 Size: SH
  1. Install the cruise control module (3) to the vehicle.
  2. Install the cruise control module (3) to the cruise control bracket (1).

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the nuts (2) that retain the cruise control module (3) to the cruise control bracket (1).

    4. Tighten
    Tighten the nuts to 5 N·m (44 lb in).

  4. Connect the cruise control cable to the cruise control module. Refer to Cruise Control Cable Replacement .
  5. Connect the electrical connector to the cruise control module.
  6. Install the air cleaner assembly to the vehicle. For the 4.3L engine, refer to Air Cleaner Assembly Replacement in Engine Controls. For the 5.0/5.7L engine, refer to Air Cleaner Assembly Replacement in Engine Controls. For the 6.5L diesel engine, refer to Air Cleaner Assembly Replacement in Engine Controls.
  7. Close the hood.