Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the Wiper/Washer System Circuit Description and perform the necessary inspections? | -- | Go to Step 2 | Go to Symptoms |
2 |
Does the windshield wiper delay function operate properly? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Does the resistance increase from positions 1- 5 within the specified values? | 25K ohms-435K ohms | Go to Step 4 | Go to Step 6 |
4 |
Did you find and correct the condition? | -- | Go to Step 8 | Go to Step 5 |
5 | Test and repair the windshield wiper motor accessory voltage supply circuit for an open or high resistance. Refer to Circuit Testing and Wiring Repairs or Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 8 | Go to Step 7 |
6 | Replace the windshield wiper/washer switch. Is the repair complete? | -- | Go to Step 8 | -- |
7 | Replace the windshield wiper motor cover. Refer to Wiper Motor Cover Replacement . Is the repair complete? | -- | Go to Step 8 | -- |
8 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
