Removal Procedure
- Remove the engine cover. Refer to
Engine Cover Replacement
.
- Remove the center floor air outlet. Refer to
Floor Air Outlet Replacement
.
- Disconnect the vacuum
connector.
- Remove the valve, inner mode door (1), outside air recirculation
door (3), outer mode door (4), by unsnapping the valve from the heater case.
- Disconnect the linkage from the valve.
Installation Procedure
- Connect the linkage to
the valve, inner mode door (1), outside air recirculation door (3) and outer
mode door (4).
- Install the valve by snapping the valve to the heater case.
- Connect the vacuum connector.
- Install the center floor air outlet. Refer to
Floor Air Outlet Replacement
.
- Install the engine cover. Refer to
Engine Cover Replacement
.