Low and High Beams Headlamps Inoperative Non VE1
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Headlights System Check? | -- | Go to Step 2 | Go to Headlight System Check |
2 | Use a test lampJ 35616-200 in order to backprobe CKT 42 (RED) cavity C at the headlamp and panel dimmer switch to ground. Does the test lamp light? | -- | Go to Step 3 | Go to Step 4 |
3 |
Does the test lamp light? | -- | Go to Step 5 | Go to Step 6 |
4 | Repair the open in CKT 42 (RED) between the underhood fuse-relay center and the headlamp and panel dimmer switch. Is the repair complete? | -- | Go to Headlight System Check | -- |
5 |
Does the test lamp light? | -- | Go to Step 7 | Go to Step 8 |
6 | Replace the headlamp and panel dimmer switch Headlamp Switch Replacement . Is the replacement complete? | -- | Go to Headlight System Check | -- |
7 | Replace the headlamp dimmer switch. Refer to Headlamp Switch Replacement . Is the repair complete? | -- | Go to Headlight System Check | -- |
8 | Repair the open in CKT 10 (YEL) between the headlamp and panel dimmer switch and the headlamp dimmer switch. Is the repair complete? | -- | Go to Headlight System Check | -- |
Low and High Beams Headlamps Inoperative VE1
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did the Headlight System Check Bring you here? | -- | Go to Step 2 | Go to Headlight System Check |
2 | Check LIGHTING Fuse 8 at the Underhood Fuse/Relay Center. Is the fuse functional? | -- | Go to Step 4 | Go to Step 3 |
3 | Locate overload and replace LIGHTING Fuse. Is the repair complete? | -- | Go to Headlight System Check | -- |
4 | Connect a test lampJ 35616-200 from CKT 42 (RED) wire at Headlamp Switch cavity C to ground. Does the test lamp light? | -- | Go to Step 6 | Go to Step 5 |
5 | Connect test lampJ 35616-200 from CKT 42 (RED) wire at Connector C100 cavity A6 to ground. Does the test lamp light? | -- | Go to Step 9 | Go to Step 10 |
6 |
Does the test lamp light? | -- | Go to Step 7 | Go to Step 11 |
7 | Connect a test lampJ 35616-200 from CKT 10 (YEL) wire at C201 cavity E13 to ground. Does the test lamp light? | -- | Go to Step 8 | Go to Step 12 |
8 | Connect a test lampJ 35616-200 from CKT 10 (LT BLU) wire cavity D at Headlamp Dimmer Switch to ground. Does the test lamp light? | -- | Go to Step 13 | Go to Step 14 |
9 | Locate and repair open in CKT 42 (RED) wire between Connector C100 and Headlamp and Panel Dimmer Switch. Is the repair complete? | -- | Go to Headlight System Check | -- |
10 | Locate and repair open in CKT 42 (RED) wire between Connector C100 and Underhood Fuse-Relay Center. Is the repair complete? | -- | Go to Headlight System Check | -- |
11 | Replace Headlamp Switch. Refer to Headlamp Switch Replacement . Is the repair complete? | -- | Go to Headlight System Check | -- |
12 | Locate and repair open in CKT 10 (YEL) wire between Headlamp Switch and C201. Is the repair complete? | -- | Go to Headlight System Check | -- |
13 | Replace Headlamp Dimmer Switch. Refer to Headlamp Switch Replacement . Is the repair complete? | -- | Go to Headlight System Check | -- |
14 | Locate and repair open in CKT 10 (LT BLU) wire between C201 and Headlamp Dimmer Switch. Is the repair complete? | -- | Go to Headlight System Check | -- |
