In order to have proper
operation and appearance of sheet metal components, it is critical that certain
fits and gaps between components be maintained. The gaps given
in this procedure are suggested as the best alignment for these
components.
| • | Align the hood with the grille in order to obtain a gap of 10-12 mm
(0.34-0.42 in). |
| | Ensure that the surface of the grille to the surface of the hood is
flush within 1.0 mm (0.04 in). |
| • | Starting with the fenders, align each fender in order to obtain
a gap of 4.0-6.0 mm (0.16-0.24 in) between the
fenders and the hood. |
| | Ensure that the surface of the fender is flush with the surface of the
hood within 1.00 mm (0.04 in). |
| • | Align the fenders in order to obtain a gap of 3.5-6.5 mm
(0.06-0.18 in) between the fenders and the marker lamp assembly. |
