Removal Procedure
- Remove the driver's knee bolster. Refer to Driver Knee Bolster Replacement .
- Remove the bolts that retain the brackets to the instrument panel trim pad.
- Roll the instrument panel back, but do not remove the instrument panel. Refer to Instrument Panel Assembly Replacement .
- Remove the bolts that retain the knee bolster brackets to the instrument panel carrier.
- Remove the knee bolster brackets from the vehicle.
Installation Procedure
- Install the knee bolster brackets to the vehicle.
- Install the bolts that retain the brackets to the instrument panel carrier.
- Install the instrument panel to the vehicle. Refer to Instrument Panel Assembly Replacement .
- Install the bolts that retain the brackets to the instrument panel trim pad.
- Install the driver's knee bolster. Refer to Driver Knee Bolster Replacement .
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the bolts to the brackets to the instrument panel carrier to
10 N·m (89 lb in).
Tighten
Tighten the bolts that retain the bracket to the instrument panel to
10 N·m (89 lb in).
