GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1998 🢒 Safari - 2WD 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Dome Lamp Replacement

Removal Procedure

    Object Number: 296149 Size: SH
  1. Press in on the sides of the lens.
  2. Remove the lens.
  3. Remove the bulb.
  4. Remove the housing.
  5. Disconnect the electrical connectors.
  6. Squeeze the clip tangs together at each clip and push the clip connector up through the housing.

Installation Procedure

    Object Number: 296149 Size: SH
  1. Connect the electrical connectors to the housing.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the housing to the roof inner trim panel with 2 screws.

    3. Tighten
    Tighten the dome lamp housing screws to 2 N·m (18 lb in).

  3. Install the bulb.
  4. Install the lens.