Did you perform the Power Windows System Check?

--

Go to Step 2

Go to Power Windows System Check

1. Access the left door lock and side window switch.
2. Turn the ignition switch to the RUN position.
3. Connect a J 39200 digital multimeter (DMM) to CKT 170 (LT GRN), terminal H at the left door lock and window switch connector C2 and CKT 171 (PPL), terminal H at the left door lock and window switch connector C1.
4. Operate the right rear window at the left door lock and side window switch in the UP/DOWN position.
5. Test for voltage.

Is ignition voltage present?

IGN+

Go to Step 3

Go to Step 5

Inspect for a poor connection at the left door lock and side window switch.

Are the connections OK?

--

Go to Step 5

Go to Step 4

Repair the connections as necessary.

Is the repair complete?

--

Go to Power Windows System Check

--

Replace the left door lock and side window switch. Refer to Front Side Door Window Switch Replacement .

Is the repair complete?

--

Go to Power Windows System Check

--