Tools Required

J 5802-A Rocker Arm Stud Remover

Important: 

•	Valve rocker arm ball studs that have damaged threads, or are loose in cylinder heads, should be replaced.

•	Valve rocker arm ball studs are pressed into the cylinder head.

•	New valve rocker arm ball studs are available in 0.0762 mm (0.003 in) and 0.3302 mm (0.013 in) oversize.

1. Place the J 5802-A over the valve rocker arm ball stud to be removed.
2. Install a nut and a flat washer.
3. Rotate the nut clockwise to remove the valve rocker arm ball stud.