GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
GMC_Truck
🢒
2000
🢒
GMC K Sierra - 4WD
🢒
Steering
🢒
Steering Wheel and Column - Standard
🢒 Steering Shaft, Lower Bearing, and Jacket - Disassemble - Off Vehicle
Steering Shaft, Lower Bearing, and Jacket - Disassemble - Off Vehicle Floor shift Export
Remove the electronic lock module assembly. Refer to
Electronic Column Lock Module - Disassemble - Off Vehicle
.
Inspect the steering column assembly for accident damage. Refer to
Steering Column Accident Damage Inspection - Off Vehicle
.
Remove the 2 pan head screws (1) from the turn signal and multifunction switch assembly (2).
Remove the turn signal and multifunction switch assembly (2).
Remove the adapter and bearing assembly (1) from the steering shaft assembly.
Remove the steering shaft assembly (1) from the steering column support assembly (2) and the steering column jacket assembly (3).
Remove the 4 TORX® head screws (1) from the steering column support assembly (2).
Discard the 4 TORX® head screws (1).
Remove the steering column support assembly (2) from the steering column jacket assembly (3).
Steering Shaft, Lower Bearing, and Jacket - Disassemble - Off Vehicle Column shift Export
Remove the electronic lock module assembly. Refer to
Electronic Column Lock Module - Disassemble - Off Vehicle
.
Inspect the steering column for accident damage. Refer to
Steering Column Accident Damage Inspection - Off Vehicle
.
Remove the 2 pan head tapping screws from the turn signal and multifunction switch assembly.
Remove the turn signal and multifunction switch assembly.
Remove the 3 flat head tapping screws from the linear shift assembly.
Remove the linear shift assembly from the steering column support assembly.
Remove the adapter and bearing assembly (1) from the steering shaft assembly.
Remove the steering shaft assembly (1) from the steering column support assembly (2) and the steering column jacket assembly (3).
Remove the 4 TORX® head screws (1) from the steering column support assembly (2).
Discard the 4 TORX® head screws (1).
Remove the steering column support assembly (2) from the steering column jacket assembly (3).