GM Service Manual Online
For 1990-2009 cars only

Tools Required

    â€¢ J 26941 Countershaft Bearing and Drive Axle Seal Remover
    â€¢ J 2619-01 Slide Hammer

    Object Number: 165104  Size: SH
  1. Remove the 3 bolts and the 3 fluid pipe clamps (1) from the torque converter housing (3).

  2. Object Number: 165107  Size: SH
  3. Remove the 2 fluid pipes (2) from the torque converter housing (1).

  4. Object Number: 165110  Size: SH
  5. Remove the bolt and the countershaft front roller bearing retainer (3) from the torque converter housing (1).

  6. Object Number: 165114  Size: SH
  7. Use the J 26941 with a J 2619-01 in order to remove the countershaft front roller bearing (1) from the torque converter housing (2).

  8. Object Number: 165116  Size: SH
  9. Remove the countershaft lubrication seal (2) from the countershaft front roller bearing bore (1).
  10. Use the J 26941 with a J 2619-01 in order to remove the right drive axle shaft fluid seal from the torque converter housing.

  11. Object Number: 165117  Size: SH
  12. Use the J 26941 with a J 2619-01 in order to remove the following components from the torque converter housing (1):
  13. • The right differential side bearing race (2)
    • The right differential selective shim (3)
  14. Clean the sealant from the torque converter housing-to-transaxle case mating surfaces.