GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2009 🢒 Envoy - 2WD 🢒 Driveline/Axle 🢒 Front Drive Axle 🢒 Front Drive Axle Actuator Replacement

Removal Procedure
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the engine protection shield. Refer to Engine Protection Shield Replacement.
  3. Disconnect the electrical connector from the actuator assembly.

    4. Object Number: 756336 Size: SH
  4. Remove the actuator assembly bolts.
  5. Remove the actuator assembly.

Installation Procedure
  1. Install the actuator assembly.

    2. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 756336 Size: SH
  2. Install the actuator assembly bolts and tighten to 6 N·m (53 lb in).
  3. Connect the electrical connector to the actuator assembly.
  4. Install the engine protection shield. Refer to Engine Protection Shield Replacement.
  5. Lower the vehicle.