To replace a stoplamp/taillamp or rear turn signal bulb, do the following:

1. Open the tailgate. See Tailgate for more information.




Remove the two screws from the taillamp assembly.

2. Pull the taillamp assembly away from the vehicle.



3. Unclip the wiring harness (B).
4. Remove the socket (rear turn signal lamp (A) or stoplamp/taillamp (C)) by rotating it counterclockwise.
5. Holding the socket, pull the bulb to release it from the socket.
6. Push the new bulb into the socket until it clicks.
7. Reverse Steps 1 through 5 to reinstall the lamp assembly.