GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2009 🢒 Canyon Pickup - 2WD 🢒 Transmission 🢒 Manual Transmission - Aisin AR5 🢒 Backup Lamp Switch Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

    2. Object Number: 1302110 Size: SH
  2. Disconnect the backup lamp switch electrical connector (1) at the pigtail.
  3. Open the tie strap securing the pigtail to the transmission.

    4. Object Number: 880943 Size: SH
  4. Remove the backup lamp switch with the aluminum washer.

Installation Procedure

    Caution: Refer to Component Fastener Tightening Caution in the Preface section.


    Object Number: 880943 Size: SH
  1. Install the backup lamp switch with a NEW aluminum washer into the transmission case.

    2. Tighten
    Tighten the backup lamp switch to 44 N·m (32 lb ft).


    Object Number: 1302110 Size: SH
  2. Secure the pigtail to the transmission with the tie strap.
  3. Connect the backup lamp switch electrical connector (1) at the pigtail.
  4. Lower the vehicle.