GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Daewoo 🢒 2008 🢒 W200 🢒 Driver Information and Entertainment 🢒 Displays and Gages 🢒 Secondary Driver Information Display Replacement

Secondary Driver Information Display Replacement Base

Removal Procedure

    Object Number: 1957790 Size: SH
  1. Remove the instrument panel (I/P) upper trim panel assembly. Refer to Instrument Panel Center Trim Panel Replacement.
  2. Remove the secondary information centre (SIC) display to I/P upper trim panel assembly retaining screws (3).
  3. Remove the SIC display (2) from the I/P upper trim panel assembly (1).

Installation Procedure

    Object Number: 1957790 Size: SH
  1. Install the SIC display (2) to the I/P upper trim panel assembly (1).

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the SIC display to I/P upper trim panel assembly retaining screws (3).

    3. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  3. Install the I/P upper trim panel assembly. Refer to Instrument Panel Center Trim Panel Replacement.
  4. For programming and setup, refer to Control Module References.