Removal Procedure
- Remove instrument panel compartment assembly. Refer to
Instrument Panel Compartment Replacement.
- Remove instrument panel wiring harness (2) from instrument panel tie bar (1).
Disconnect electrical connectors.
- Remove instrument panel tie bar (2).
Remove 4 instrument panel tie bar bolts (3, 4).
Remove 2 instrument panel tie bar nuts (1).
- Remove heater wiring harness.
- Remove the floor air outlet (2).
Remove the 6 floor air outlet bolts (1).
Installation Procedure
Caution: Refer to Fastener Caution in the Preface section.
- Install the floor air outlet (2).
Install the 6 floor air outlet bolts (1) and tighten to
XX N·m (XX lb in).
- Install heater wiring harness.
- Install instrument panel tie bar (2).
Install 4 instrument panel tie bar bolts (3, 4) and tighten to
XX N·m (XX lb in).
Install 2 instrument panel tie bar nuts (1) and tighten to
XX N·m (XX lb in).
- Attach instrument panel wiring harness (2) to instrument panel tie bar (1).
Connect electrical connectors.
- Install instrument panel compartment assembly. Refer to
Instrument Panel Compartment Replacement.