Removal Procedure
Warning: The transaxle fluid is hot. Caution must be taken to prevent personal injury when the transaxle fluid drains from the transaxle.
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle.
- Remove the transmission case oil drain plug (2) and allow the transmission to drain completely.
- Remove the transmission case oil fill plug (1).
Installation Procedure
Caution: Refer to Fastener Caution in the Preface section.
- Install the transmission case oil drain plug (2) and tighten to
6 N·m + 45° till 180° (53 lb ft + 45° till 180°).
- Add transmission fluid until it it seeps out of the fluid level check plug hole.
- Install the transmission case oil fill plug (1) and tighten to
6 N·m + 45° till 180° (53 lb ft + 45° till 180°).
- Lower the vehicle.