Removal Procedure
- Disconnect electrical connectors.
- Disconnect the vacuum hose quick fitting (5) from power brake booster vacuum pump (2).
- Remove the nut (1, 3) and screws (4).
- Remove the power brake booster vacuum pump (1) from the vehicle.
Installation Procedure
- Install power brake booster vacuum pump (1) to the vehicle.
- Install the nut (1, 3) and screws (4) and tighten to
xx N·m (xx lb ft).
- Connect vacuum hose quick fitting (5) to the power brake booster vacuum pump (2).
- Connect electrical connectors.