Removal Procedure
- Open the hood.
- Cut the power steering pump belt (2) with a appropriate cutting tool at position (1).
- Remove the power steering pump belt (2)
Warning: Use only the CH-48845 Spring Compressor when servicing suspension components on this vehicle. Other tools may not be strong enough for the springs on this vehicle and you could be injured if you do not use Special Tool CH-48845. Failure to do so could result in serious personal injury.
Installation Procedure
- Install the power steering pump belt (2) with enclosed tools from the part kit.
- Close the hood.
Warning: Use only the CH-48845 Spring Compressor when servicing suspension components on this vehicle. Other tools may not be strong enough for the springs on this vehicle and you could be injured if you do not use Special Tool CH-48845. Failure to do so could result in serious personal injury.
Caution: Do not use belt dressing on the drive belt. Belt dressing causes the breakdown of the composition of the drive belt. Failure to follow this recommendation will damage the drive belt.
