Special Tools

EN-45059 Torque Angle Sensor Kit

For equivalent regional tools, refer to Special Tools.

Caution: Refer to Fastener Caution in the Preface section.





Note: Two mechanics are required.

1. Install the camshaft adjuster (3) and the camshaft adjuster bolts (2) and tighten the bolts in three passes:

Hold at the appropriate camshaft hexagon.

1.1.	First pass tighten to  65 N·m (48 lb ft)

1.2.	Second pass to  120 degrees using the EN-45059 sensor kit

1.3.	Third pass to  15 degrees using the EN-45059 sensor kit

2. Install the 2 camshaft adjuster closure plugs (1) and tighten to  30 N·m (23 lb ft).