Removal Procedure
- Open the hood.
Note: If the engine oil level is at maximum, some oil may emerge when drawing out the oil dipstick guide tube.
- Place collecting basin underneath.
- Remove the oil level indicator tube bolt (1).
- Remove the oil level indicator tube (2).
Installation Procedure
- Install the oil level indicator tube (2).
Use a NEW oil level indicator tube gasket.
Caution: Refer to Fastener Caution in the Preface section.
- Install the oil level indicator tube bolt (1) and tighten to
8 N·m (71 lb in).
- Close the hood.