GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Vivant 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Front Fender Replacement

Removal Procedure

    Object Number: 1282105 Size: SH
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the front wheel. Refer to Tire and Wheel Removal and Installation .
  3. Remove the front fender liner.
  4. Remove the bolts.

    5. Object Number: 1282106 Size: SH
  5. Remove the headlamp. Refer to Headlamp Replacement .
  6. Remove the bolt between the bumper fascia and the fender.
  7. Remove the screw.

    8. Object Number: 1282107 Size: SH
  8. Remove the air inlet grille. Refer to Air Inlet Grille Panel Replacement.
  9. Remove the bolts along the top of the fender.
  10. Remove the fender.

Installation Procedure

    Object Number: 1282107 Size: SH
  1. Install the fender.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the bolts along the top of the fender.

    3. Tighten
    Tighten the fender bolts to 8 N·m (71 lb in).

  3. Install the air inlet grille. Refer to Air Inlet Grille Panel Replacement.

    4. Object Number: 1282106 Size: SH
  4. Install the screw.
  5. Install the bolt between the bumper fascia and the fender.

    6. Tighten
    Tighten the fender bolts to 4 N·m (35 lb in).

  6. Install the headlamp. Refer to Headlamp Replacement .

    7. Object Number: 1282105 Size: SH
  7. Install the bolts.

    8. Tighten
    Tighten the lower fender bolts to 8 N·m (71 lb in).

  8. Install the front fender liner.
  9. Install the front wheel. Refer to Tire and Wheel Removal and Installation .