Step | Action | Values | Yes | No |
|---|---|---|---|---|
1 | Inspect fuse F3. Is the fuse open? | -- | Go to Step 2 | Go to Step 3 |
2 |
Did you complete the repair? | -- | System OK | -- |
3 | Use a voltmeter to measure for power at fuse F3. Does the voltage measure the specified value? | 11-14 V | Go to Step 5 | Go to Step 4 |
4 | Repair the open power supply circuit to fuse F3. Did you complete the repair? | -- | System OK | -- |
5 |
Is the circuit open? | -- | Go to Step 6 | Go to Step 9 |
6 |
Does the resistance measure the specified value? | 0 ohms | Go to Step 7 | Go to Step 8 |
7 | Repair the open circuit between fuse F3 and terminal 2 of the chime module connector. Did you complete the repair? | -- | System OK | -- |
8 | Replace the key reminder switch. Did you complete the repair? | -- | System OK | -- |
9 |
Does the ohmmeter indicate the specified value? | 0 ohms | Go to Step 11 | Go to Step 10 |
10 | Repair the open ground circuit between ground and terminal 5 of the chime module connector. Did you complete the repair? | -- | System OK | -- |
11 |
Does the resistance measure the specified value? | 0 ohms | Go to Step 12 | Go to Step 13 |
12 | Replace the chime module. Did you complete the replacement? | -- | System OK | -- |
13 |
Does the resistance measure the specified value? | 0 ohms | Go to Step 15 | Go to Step 14 |
14 | Repair the open circuit between the chime module connector 4 and the driver door open switch connector 1. Did you complete the repair? | -- | System OK | -- |
15 | Replace the driver door-open switch. Did you complete the replacement? | -- | System OK | -- |
