If your vehicle has this feature, the switch is located between the map lamp buttons.
You must manually open and close the sunroof shade.
The sunroof will operate only while the ignition is turned to ON. The sunroof can be opened to a vent position or it can be opened all of the way.
To open the sunroof to the vent position, do the following:
- Open the sunroof shade.
- Push and hold the down arrow switch.
To return the sunroof to its original position, push the up arrow switch and hold it until the sunroof reaches the desired position.
To fully open the sunroof, do the following:
- Open the sunroof shade.
- Push the up arrow switch.
The sunroof will open automatically until you push either the up arrow switch again or the down arrow switch.
To close the sunroof, push the left part of the switch and hold it until the sunroof is closed. The sunroof will stop if the switch is released during operation.
In both the vent and fully open positions, the air flow can be adjusted for driving comfort by pushing and holding the switch until the sunroof moves to the desired position.
The sunroof glass panel cannot be opened or closed if your vehicle has an electrical failure.
