For 1990-2009 cars only
Removal Procedure
- Use a heat gun in order to heat the sliding window bumpers. Hold the heat gun 152 mm (6 in) from the surface. Use a circular motion to apply heat for about 30 seconds.
- Use a flat-bladed tool in order to peel the window bumpers from the panel surface. Do not damage the paint.
- Clean the body panel using oil-free naphtha or alcohol.
Installation Procedure
- Use a heat lamp or heat gun in order to warm the body panel to a minimum of 21°C (70°F).
- Peel the backing from the front end of the window bumpers. Do not touch the adhesive backing.
- Press the window bumpers onto the body.
- Hold the window bumpers to the body in order to ensure proper adhesion.
