GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
  2. Remove the front door water deflector. Refer to Front Side Door Water Deflector Replacement .
  3. Remove the front door weatherstrip. Refer to Front Side Door Window Weatherstrip Replacement .
  4. Remove the front door window. Refer to Front Side Door Window Replacement .
  5. Remove the front door lock module. Refer to Front Side Door Lock Replacement .

  6. Object Number: 319748  Size: SH
  7. Remove the front door window run channel screws.
  8. Remove the front door window run channel from the front door.

Installation Procedure


    Object Number: 319748  Size: SH
  1. Install the front door window run channel to the door.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the front door window run channel screws.
  4. Tighten
    Tighten the screws to 10 N·m (89 lb in).

  5. Install the front door lock module. Refer to Front Side Door Lock Replacement .
  6. Install the front door window. Refer to Front Side Door Window Replacement .
  7. Install the front door window weatherstrip. Refer to Front Side Door Window Weatherstrip Replacement .
  8. Install the front door water deflector. Refer to Front Side Door Water Deflector Replacement .
  9. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement .