GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
1998
🢒
Venture
🢒
Body and Accessories
🢒
Body Control System
🢒 Ignition Switch Replacement - On Vehicle
Removal Procedure
Disconnect the battery negative cable from the battery. Refer to
Battery Negative Cable Disconnection and Connection
in Engine Electrical.
Remove the left side closeout insulator panel. Refer to
Instrument Panel Insulator Panel Replacement - Left Side
in Instrument Panel, Gauges and Console.
Disconnect the steering column electrical connector from the vehicle.
Remove the steering column shrouds. Refer to
Steering Column Trim Covers - Disassemble - Off Vehicle
.
Remove the ignition lock cylinder. Refer to
Ignition Lock Cylinder Replacement - On Vehicle
.
Remove the ignition switch. Refer to
Ignition and Key Alarm Switch Assembly - Disassemble - Off Vehicle
.
Installation Procedure
Install the ignition switch. Refer to
Ignition and Key Alarm Switch Assembly - Assemble - Off Vehicle
.
Install the ignition lock cylinder. Refer to
Ignition Lock Cylinder Replacement - On Vehicle
.
Install the steering column shrouds. Refer to
Steering Column Trim Covers - Assemble - Off Vehicle
.
Connect the steering column electrical connector to the vehicle.
Install the left side closeout insulator panel. Refer to
Instrument Panel Insulator Panel Replacement - Left Side
in Instrument Panel, Gauges and Console.
Connect the battery negative cable to the battery. Refer to
Battery Negative Cable Disconnection and Connection
in Engine Electrical.