Notice: Do not pry against the splash shield or backing plate in attempt to free the drum. This will bend the splash shield or backing plate. A bent backing plate may cause brake chatter and/or pulsation.

1. Remove the tire and wheel. Refer to Wheel Removal in Tires and Wheels.
2. Remove the brake drum. Refer to Brake Drum Replacement .
3. Remove the brake shoes. Refer to Brake Shoe Replacement .
4. Remove the park brake actuator from the park brake cable.
5. Remove the park brake cable ONLY from the backing plate.

•	For the left side park brake cable replacement, refer to Parking Brake Rear Cable Replacement - Left Side .

•	For the right side park brake cable replacement, refer to Parking Brake Rear Cable Replacement - Right Side .

6. Remove the wheel cylinder (3). Refer to Wheel Cylinder Replacement .
7. Remove the wheel bearing/hub. Refer to Rear Wheel Bearing and Hub Replacement in Rear Suspension.
8. Remove the backing plate.

1. Install the wheel bearing/hub. Refer to Rear Wheel Bearing and Hub Replacement in Rear Suspension.
2. Install the wheel cylinder (3). Refer to Wheel Cylinder Replacement .
3. Install the park brake cable to the backing plate.

•	For the left side park brake cable replacement, refer to Parking Brake Rear Cable Replacement - Left Side .

•	For the right side park brake cable replacement, refer to Parking Brake Rear Cable Replacement - Right Side .

4. Install the park brake actuator to the park brake cable.
5. Install the brake shoes. Refer to Brake Shoe Replacement .
6. Install the brake drum. Refer to Brake Drum Replacement .
7. Install the tire and wheel. Refer to Wheel Installation in Tires and Wheels.