GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Uplander Ext. 🢒 Engine 🢒 Engine Controls - 3.5L 🢒 Fuel Level Sensor Replacement

Removal Procedure

    Object Number: 1544791 Size: SH
  1. Remove the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
  2. Disconnect the fuel level sensor electrical connector (1) from under the cover.
  3. Gently lift up the retainer (2) and slide the sensor down off of the bucket.

Installation Procedure

    Object Number: 1544791 Size: SH
  1. Slide the NEW sensor up along the bucket until the retainer (2) is engaged.
  2. Connect the fuel level sensor electrical connector (1) under the cover.
  3. Install the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .