GM Service Manual Online
For 1990-2009 cars only
Makes
š¢
Chevrolet
š¢
2009
š¢
Uplander
š¢
Diagnostic Navigation
š¢
Vehicle Diagnostic Information
š¢ OnStar Button Assembly Replacement
Removal Procedure
Remove the courtesy lamp lens.
Remove the screw near the courtesy lamp.
Grasp the overhead console and pull downward in order to disengage the fasteners.
Disconnect the electrical connectors from the overhead console.
Remove the screws securing the OnStarĀ® button assembly (4) to the overhead console.
Remove the OnStarĀ® Microphone from the OnStarĀ® button assembly. Refer to
Mobile Telephone Microphone Replacement
.
Installation Procedure
Install the OnStarĀ® Microphone into the OnStarĀ® button assembly. Refer to
Mobile Telephone Microphone Replacement
.
Position the OnStarĀ® button assembly (4) to the overhead console.
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the screws to secure the OnStarĀ® button assembly to the overhead console and tighten to
2 NĀ·m (18 lb in)
.
Connect the electrical connectors.
Align the overhead console within the vehicle.
Press up on the overhead console engaging the fasteners in order to secure the console to the vehicle.
Install the overhead console screw and tighten to
2 NĀ·m (18 lb in)
.
Install the courtesy lamp lens.