Removal Procedure
- Remove the courtesy lamp lens.
- Remove the screw near the courtesy lamp.
- Grasp the overhead console and pull downward in order to disengage the fasteners.
- Disconnect the electrical connectors from the overhead console.
- Remove the screws securing the OnStarĀ® button assembly (4) to the overhead console.
- Remove the OnStarĀ® Microphone from the OnStarĀ® button assembly. Refer to
Mobile Telephone Microphone Replacement .
Installation Procedure
- Install the OnStarĀ® Microphone into the OnStarĀ® button assembly. Refer to
Mobile Telephone Microphone Replacement .
- Position the OnStarĀ® button assembly (4) to the overhead console.
Notice: Refer to Fastener Notice in the Preface section.
- Install the screws to secure the OnStarĀ® button assembly to the overhead console.
Tighten
Tighten the nuts to 2 NĀ·m (18 lb in).
- Connect the electrical connectors.
- Align the overhead console within the vehicle.
- Press up on the overhead console engaging the fasteners in order to secure the console to the vehicle.
- Install the overhead console screw.
Tighten
Tighten the screw to 2 NĀ·m (18 lb in).
- Install the courtesy lamp lens.