GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2006
🢒
Uplander
🢒
Accessories
🢒
Theft Deterrent
🢒 Theft Deterrent Exciter Module Replacement
Removal Procedure
Disable the SIR. Refer to
SIR Disabling and Enabling
in SIR.
Remove the trim covers. Refer to
Steering Column Trim Covers Replacement
in Steering Wheel and Column.
Remove the ignition lock cylinder. Refer to
Ignition Lock Cylinder Replacement
in Steering Wheel and Column.
Remove the theft deterrent module (TDM) wiring harness from the steering column harness.
Disconnect the electrical connector.
Pull the TDM (2) away from the lock cylinder housing (1).
Installation Procedure
Push the TDM (2) onto the lock cylinder housing (1) .
Install the theft deterrent wiring harness to the steering column harness.
Connect the electrical connector.
Install the ignition lock cylinder. Refer to
Ignition Lock Cylinder Replacement
in Steering Wheel and Column.
Replace the steering column trim covers. Refer to
Steering Column Trim Covers Replacement
in Steering Wheel and Column.
Enable the SIR system. Refer to
SIR Disabling and Enabling
in SIR.