Removal Procedure
- Push in the folding top latch buttons (2).
- Pull each latch (1) back.
- Unhook each latch (1) from the front top bow.
- Lift folding top #1 bow (4) to an upright
position.
- Unsnap the snap (3) which secures each
tension strap (1) in order to release the tension on the front folding
top material.
- Remove the screw from each side which secures
the front folding top material (1) to the front folding top weatherstrip
retainer (2).
- Fold the rear portion of the front folding top material (1)
back in order to gain access to the front folding top weatherstrip retainer
mounting screws.
- Remove the following components from the vehicle:
8.2. | The front folding top weatherstrip retainer (2) |
Installation Procedure
- Install the front folding top weatherstrip retainer (2)
to the vehicle. Secure the retainer with the 4 screws.
- Install the front folding top material (1) to the front
folding top weatherstrip retainer (2). Secure the material to the retainer
with the 2 screws.
- Snap the snap (3) which secures each tension
strap (1).
- Lower the folding top #1 bow.
- Hook the folding top #1 bow to the folding top latches (1).
- Push the latches (1) down until the latches click into
place.