Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Outside Rearview Mirror Schematics | |||
1 | Did you review the Outside Mirror Description and Operation and perform the necessary inspections? | Go to Step 2 | Go to Symptoms - Doors |
2 | Verify that the power mirrors are inoperative. Are both power mirrors inoperative? | Go to Step 3 | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems |
3 | Backprobe the power mirror switch with a test lamp from cavity 5 to ground with the ignition switch in the ON position. Does the test lamp light? | Go to Step 4 | Go to Step 7 |
4 | Backprobe the power mirror switch with a test lamp from cavity 7 to B+. Does the test lamp light? | Go to Step 5 | Go to Step 8 |
5 |
Is continuity present? | Go to Step 6 | Go to Step 9 |
6 | Inspect for poor connections at the harness connector of the mirror switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 11 | Go to Step 10 |
7 | Repair the open in the WHT/BLK wire between the power mirror switch and the junction block. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | Go to Step 11 | -- |
8 | Repair the open in the BLK wire between the power mirror switch and G200. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | Go to Step 11 | -- |
9 | Repair the open in the GRY wire between the power mirror switch and S243. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | Go to Step 11 | -- |
10 | Replace the power mirror switch. Refer to Power Mirror Switch Replacement in Instrument Panel, Gages and Console. Is the repair complete? | Go to Step 11 | -- |
11 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
