For 1990-2009 cars only
Removal Procedure
- Remove the lumbar control knob. Refer to Lumbar Support Knob Replacement .
- Unhook the J channel (2) and pull up the seat back cover (1) to access the lumbar support.
- Remove the lumbar control cable (3) from the lumbar control (4).
- Remove the lumbar support (2) from the front seat back (5) by compressing the four lumbar support push-in retainers (1).
Important: The lumbar support must be in the relaxed position to remove the control cable.
Installation Procedure
- Install the lumbar support (2) with the push in retainers (1) to the seat back frame (5).
- Push in the retainers (1) into place until fully seated.
- Install the lumbar support cable (3) to the lumbar support control (4).
- Pull down the front seat back cover (1) and refasten the J channel (2).
- Install the armrest. Refer to Armrest Replacement .
- Install the lumbar control knob. Refer to Lumbar Support Knob Replacement .
