For 1990-2009 cars only
- Apply clean engine oil to the following components:
- Install the camshaft to the cylinder head.
- After applying the engine oil to the housing bolts, tighten in the sequence shown.
| • | Cams |
| • | Journals |
| • | The oil seal |
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the camshaft housing bolts to 10 N·m (89 lb in).
