GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1999 🢒 Tahoe 4WD - RHD 🢒 Body and Accessories 🢒 Exterior Trim 🢒 Radiator Grille Emblem/Nameplate Replacement

Removal Procedure

    Object Number: 290905 Size: SH
  1. Preheat the emblem to a temperature of 29°C to 32°C (80°F to 90°F).
  2. Peel the emblem from the body area.
  3. Clean any remaining adhesive from the area using a suitable cleaner.

Installation Procedure

    Object Number: 290905 Size: SH

    Notice: These items should be applied in an environment free of dust or dirt that could come in contact with the adhesive backing and prevent proper adhesion.

  1. Clean the area where the emblem is to be mounted. Use a suitable solvent such as flash naphtha or a mixture of 50 percent isopropyl/alcohol and 50 percent water.
  2. Dry the area thoroughly.
  3. Heat the body area to a temperature range of 27C° to 41°C (80°F to 105°F).
  4. Carefully heat the emblem to a temperature range of 29°C to 32°C (80°F to 90°F).
  5. Remove the protective liner.

    6. Notice: Certain emblems can be clamped to the body at the center of the emblem. Place a piece of foam between the clamp and the emblem to protect it.

  6. Firmly press the emblem to the area.