Step | Action | Value(s) | Yes | No | ||||
|---|---|---|---|---|---|---|---|---|
|
Important:: Perform a diagnostic system check and repair DTC(s) P0500 or P0501 before performing the following diagnostic. | ||||||||
1 | Did you perform the OBD II System Check? | -- | Go to Step 2 | Go to Powertrain OBD System Check (5.0L/5.7L); Powertrain OBD System Check (6.5L) in Engine Controls, 1999 C/K Service Manual | ||||
2 |
Is continuity present? | -- | Go to Step 3 | Go to Step 4 | ||||
3 | Locate and repair the short to ground in CKT 389 (DK GRN) between the VCM (Gas) or the Vehicle Speed Signal Buffer and PCM (Diesel). Be sure to check between C223, at the Convenience Center and the Audio Alarm Module. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Powertrain OBD System Check (5.0L/5.7L); Powertrain OBD System Check (6.5L) in Engine Controls, 1999 C/K Service Manual | -- | ||||
4 | Connect a J 39200 DMM (continuity) between cavity 10 of the I/P Cluster and VCM connector C4, cavity 4 (Gas), or PCM connector C2, cavity A6 and VSSB cavity 15. Is continuity present? | -- | Go to Step 6 | Go to Step 5 | ||||
5 | Locate and repair the open in CKT 389 (DK GRN) between the I/P Cluster and the VCM (Gas), or PCM and VSSB (Diesel). Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Powertrain OBD System Check (5.0L/5.7L); Powertrain OBD System Check (6.5L) in Engine Controls, 1999 C/K Service Manual | -- | ||||
6 | Replace the instrument cluster. Refer to Instrument Cluster Replacement . Is the repair complete? | Go to Powertrain OBD System Check (5.0L/5.7L); Powertrain OBD System Check (6.5L) in Engine Controls, 1999 C/K Service Manual | -- | |||||
