Step | Action | Value(s) | Yes | No | ||||
|---|---|---|---|---|---|---|---|---|
Tools Required
| ||||||||
1 | Was the Wiper/Washer System Check performed? | -- | Go to Step 2 | |||||
2 |
Does the test lamp light? | -- | Go to Step 4 | Go to Step 3 | ||||
3 | Repair open in CKT393(WHT) between rear window wiper / washer switch and the I/P fuse block. Is the repair complete? | -- | -- | |||||
4 |
Does the test lamp light? | -- | Go to Step 6 | Go to Step 5 | ||||
5 | Replace the rear window wiper / washer switch. Is the repair complete? | -- | -- | |||||
6 |
Does the test lamp light? | -- | Go to Step 8 | Go to Step 7 | ||||
7 | Repair open in CKT 392 (DK GRN) between rear window washer pump and rear window wiper / washer switch. Is the repair complete? | -- | -- | |||||
8 | Connect a DMM, set on ohms, between rear window washer pump motor connector cavity B and ground. Does the test lamp light? | -- | Go to Step 9 | Go to Step 10 | ||||
9 | Replace the rear window washer pump motor. Is the repair complete? | -- | -- | |||||
10 | Repair open in CKT150(BLK) between rear window washer pump motor and G113. Is the repair complete? | -- | -- | |||||
