GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 290901  Size: SH
  1. Remove the wiper blade assembly from the wiper arm. Use the following procedure:
  2. 1.1. Push in the button on the wiper blade assembly clip and remove the wiper blade assembly from the wiper arm.
    1.2. Pull out the wiper arm through the opening in the wiper blade assembly.
  3. Remove the wiper blade insert by pulling it out through the wiper blade assembly claws.

Installation Procedure


    Object Number: 290901  Size: SH
  1. Install the wiper blade insert into the wiper blade assembly.
  2. Slide the wiper blade insert through the wiper blade assembly claws until the claw locks into the notches on the wiper blade insert.

  3. Install the wiper blade assembly onto the wiper arm.