1. Remove the negative battery cable.
2. Gently grasp the side marker lamp and push toward the rear of the vehicle and pull the front of the lamp outwards from the fender.
3. Remove the bulb assembly from the side marker lamp by turning the bulb assembly to release.

Tape the wires to the fender in order to prevent the wires from falling into the fender.




4. Remove the side marker lamp from the vehicle.

Installation Procedure

1. Remove the tape from the wires.
2. Install the bulb assembly to the side marker lamp.



3. Install the side marker lamp into the fender.
4. Connect the negative battery cable.