GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1999 🢒 Tahoe 4WD - RHD 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Parking and Turn Signal Lamp Replacement

Removal Procedure

    Object Number: 290853 Size: SH
  1. Disconnect the electrical connector from the lamp assembly which is located under the hood.

    2. Object Number: 290851 Size: SH
  2. Remove the nuts from the back of the bracket.
  3. Carefully pull the lamp assembly from the bracket.
  4. Remove the following items:
    5. • The screws
    • The lens
    • The gasket
  5. Remove the bulb.

Installation Procedure
  1. Install the bulb.
  2. Install the following items:
    3. • The gasket
    • The lens
    • The screws
  3. Install the lamp assembly to the bracket.

    4. Object Number: 290853 Size: SH
  4. Install the nuts to the back of the bracket.
  5. Connect the electrical connector to the lamp assembly.

    6. Object Number: 290851 Size: SH
  6. Install the screws through the top of the radiator support and tighten.