GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Spark 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Camshaft Position Sensor Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 1225063 Size: SH
  1. Disconnect the negative battery cable.
  2. Disconnect the camshaft position (CMP) sensor connector.
  3. Remove the CMP sensor retaining bolt.
  4. Remove the CMP sensor.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1225065 Size: SH
  1. Install the CMP sensor and retaining bolts and tighten to 10-14 N·m (89-124 lb in).
  2. Connect the CMP sensor connector.
  3. Connect the negative battery cable.