GM Service Manual Online
For 1990-2009 cars only

Third Row

If your child restraint is equipped with the LATCH system, see Lower Anchors and Top Tethers for Children (LATCH) in your owner manual.

The center seat position in the third row has a lap belt. Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say.


    Object Number: 1437632  Size: B3
  1. Make the belt as long as possible by tilting the latch plate and pulling it along the belt.
  2. Put the child restraint on the seat.
  3. Run the vehicle's safety belt through or around the restraint. The child restraint instructions will show you how.

  4. Object Number: 1379322  Size: B3
  5. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.
  6. To tighten the belt, pull its free end while you push down on the child restraint. If you are using a forward-facing child restraint, you may find it helpful to use your knee to push down on the child restraint as you tighten the belt.
  7. If your child restraint has a top tether, attach and tighten the top tether to the top tether anchor. Refer to the instructions that came with the child restraint and to Lower Anchors and Top Tethers for Children (LATCH) in your owner manual.
  8. Push and pull the child restraint in different directions to be sure it is secure.

To remove the child restraint, just unbuckle the vehicle's safety belt and unfasten the top tether. It will be ready to work for an adult or larger child passenger.