To replace one of these bulbs:

•	Stoplamp/Turn Signal/Taillamp

•	Back-up Lamp

•	Stoplamp/Turn Signal/Taillamp

1. Open the tailgate. Tailgate for more information.




Remove the two rear lamp assembly screws near the tailgate latch strikerpost and pull out the lamp assembly.

2. Turn the bulb socket counterclockwise to remove it from the taillamp assembly.
3. Pull the old bulb straight out from the socket.
4. Press a new bulb into the socket and turn the socket clockwise into the taillamp assembly.
5. Reinstall the taillamp assembly.

1. Backup Lamp

2. Stoplamp/Taillamp/Turn Signal Lamp

To replace one of these bulbs:

1. Remove the four screws.
2. Lift the lens off the lamp assembly.
3. Turn the old bulb counterclockwise and pull the old bulb straight out from the socket.
4. Install a new bulb into the socket, turn it clockwise, and press it in until it is tight.
5. Reinstall the lens and the four screws.