GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2007
🢒
Silverado Classic - 4WD
🢒
Power and Signal Distribution
🢒
Wiring Systems and Power Management
🢒 Electronic Traction Control Switch Replacement
Removal Procedure
Remove the instrument panel (I/P) bezel. Refer to
Instrument Panel Cluster Trim Plate Bezel Replacement
.
Gently lift the retaining tabs (2) and remove the stabilitrak switch (3) from the I/P assembly (1).
Disconnect the harness connector from the stabilitrak switch.
Installation Procedure
Connect the harness connector to the stabilitrak switch.
Install the stabilitrak switch (3) into the I/P assembly (1)
Ensure that the switch is secure into both retaining tabs (2).
Install the I/P bezel. Refer to
Instrument Panel Cluster Trim Plate Bezel Replacement
.