Step | Action | Value(s) | Yes | No | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
1 | Was the Cruise Control System Check performed? | -- | Go to Step 2 | |||||||
2 | Does the speedometer operate correctly? | -- | Go to Step 3 | |||||||
3 |
Does the test lamp light? | -- | Go to Step 5 | Go to Step 4 | ||||||
4 | Locate and repair the open in CKT 41 (BRN). Is the repair complete? | -- | -- | |||||||
5 | With the cruise control switch in the ON position, connect a test lamp from ground to each of the following cavities of connector C211 while activating the corresponding part of the switch.
Does the test lamp light each time? | -- | Go to Step 7 | Go to Step 6 | ||||||
6 | Replace the Multifunction Lever assembly. Go to Multifunction Lever Replacement Is the repair complete? | -- | -- | |||||||
7 |
Does the test lamp light? | -- | Go to Step 9 | Go to Step 8 | ||||||
8 | Locate and repair the open in CKT 84 (DK BLU). Is the repair complete? | -- | -- | |||||||
9 | Connect a test lamp from cavity 25 of the power inverter module connector CKT 87 (GRY/BLK) to ground and activate the R/A switch. Does the test lamp light? | -- | Go to Step 11 | Go to Step 10 | ||||||
10 | Locate and repair the open in CKT 87 (GRY/BLK). Is the repair complete? | -- | -- | |||||||
11 | Connect a test lamp from cavity 10 of the power inverter module connector CKT 397 (GRY) to ground. Does the test lamp light? | -- | Go to Step 13 | Go to Step 12 | ||||||
12 | Locate and repair the open in CKT 397 (GRY). Is the repair complete? | -- | -- | |||||||
13 | Connect a test lamp from cavity 24 of the power inverter module connector CKT 420 (PPL) to ground. Does the test lamp light? | -- | Go to Step 15 | Go to Step 14 | ||||||
14 | Locate and repair the open in CKT 420 (PPL). Is the repair complete? | -- | -- | |||||||
15 | Replace the Power Inverter Module. Is the repair complete? | -- | -- |
