GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2000
🢒
S10 Pickup - 4WD
🢒
Transmission/Transaxle
🢒
Manual Transmission - NV 3500
🢒 Parking Brake Front Cable Replacement
Removal Procedure
Raise the vehicle and support the vehicle with safety stands. Refer to
Lifting and Jacking the Vehicle
in General Information.
Disconnect the right rear cable at the equalizer.
Remove the park brake cable retainer.
Remove the left hinge pillar trim. Refer to
Body Hinge Pillar Trim Panel Replacement - Left Side
in Interior Trim.
Remove the retainer and the grommet.
Disconnect the cable from the lever.
Disconnect the front cable.
Installation Procedure
Install the front cable.
Connect the retainer and the grommet. All retaining fingers must be completely through the hole.
Connect the cable to the lever.
Install the left hinge pillar trim. Refer to
Body Hinge Pillar Trim Panel Replacement - Left Side
in Interior Trim.
Install the retainer.
Connect the right rear cable to the equalizer and to the nut.
Adjust the park brake cable. Refer to
Park Brake Cable Service/Adjustment
.
Lower the vehicle.